CanMore Sport-Guide Mate Bedienungshandbuch PDF herunterladen (Seite 559)

100

101

If the tire pressure is 19 psi (1.3 Bar) or higher:

1. Press the Power Button (4) to turn on TIREFIT and

inflate the tire to the pressure indicated on the tire and

loading information label on the driver-side door

opening.

NOTE: If the tire becomes over-inflated, press the Defla-

tion Button to reduce the tire pressure to the recom-

mended inflation pressure before continuing.

2. Disconnect the TIREFIT kit from the valve stem,

reinstall the cap on the valve stem and unplug from 12

Volt outlet.

3. Place the TIREFIT kit in its proper storage area in the

vehicle.

4. Have the tire inspected and repaired or replaced at the

earliest opportunity at an authorized dealer or tire

service center.

5. Replace the Sealant Bottle (1) and Sealant Hose (6)

assembly at your authorized dealer as soon as pos-

sible. Refer to “(F) Sealant Bottle and Hose Replace-

ment.”

NOTE: When having the tire serviced, advise the autho-

rized dealer or service center that the tire has been sealed

using the TIREFIT service kit.

(F) Sealant Bottle And Hose Replacement:

1. Uncoil the Sealant Hose (6) (clear in color).

2. Locate the round Sealant Bottle release button in the

recessed area under the sealant bottle.

3. Press the Sealant Bottle release button. The Sealant

Bottle (1) will pop up. Remove the bottle and dispose

of it accordingly.

4. Clean any remaining sealant from the TIREFIT hous-

ing.

WHAT TO DO IN EMERGENCIES 557

1 2 ... 554 555 556 557 558 559 560 561 562 563 564 ... 682 683

Kommentare zu diesen Handbüchern

Keine Kommentare

CanMore Sport-Guide Mate Bedienungshandbuch Seite 559

Kommentare zu diesen Handbüchern