CanMore Sport-Guide Mate Bedienungshandbuch PDF herunterladen (Seite 637)

100

101

3. Firmly grasp the cap and rotate it counterclockwise to

unlock it.

4. Firmly grasp the bulb and connector assembly and

rotate counterclockwise to remove from the housing.

5. Disconnect the bulb from the electrical connector and

then connect the replacement bulb.

CAUTION!

Do not touch the new bulb with your fingers. Oil

contamination will severely shorten bulb life. If the

bulb comes in contact with any oily surface, clean the

bulb with rubbing alcohol.

Install the bulb and connector assembly into the head-

lamp housing and rotate clockwise to lock it in place.

7. Install the bulb cap in the headlamp housing and

rotate clockwise to lock it in place.

8. Lock upper door in wheel liner.

Front Turn Signals

1. Open the hood.

NOTE: Removal of the air cleaner filter housing may be

necessary prior to replacing bulbs in the upper lamp

assembly on the passenger side of the vehicle.

2. Twist the bulb and socket assembly counterclockwise,

and then remove the bulb and socket assembly from

the lamp housing.

3. Pull the bulb out of the socket and insert the replace-

ment bulb.

MAINTAINING YOUR VEHICLE 635

1 2 ... 632 633 634 635 636 637 638 639 640 641 642 ... 682 683

Kommentare zu diesen Handbüchern

Keine Kommentare

CanMore Sport-Guide Mate Bedienungshandbuch Seite 637

Kommentare zu diesen Handbüchern