CanMore Sport-Guide Mate Bedienungshandbuch PDF herunterladen (Seite 115)

100

101

8. If the child restraint has a top tether strap and the

seating position has a top tether anchorage, connect

the tether strap to the anchorage and tighten the tether

strap. See the section “Installing Child Restraints

Using the Top Tether Anchorage” for directions to

attach a tether anchor.

9. Test that the child restraint is installed tightly by

pulling back and forth on the child seat at the belt

path. It should not move more than 1 inch (25.4 mm)

in any direction.

Any seat belt system will loosen with time, so check the

belt occasionally, and pull it tight if necessary.

Installing A Child Restraint With A Cinching

Latch Plate (CINCH) — If Equipped

1. Place the child seat in the center of the seating

position. For some second row seats, you may need to

recline the seat and / or raise the head restraint to get

a better fit. If the rear seat can be moved forward and

rearward in the vehicle, you may wish to move it to its

rear-most position to make room for the child seat.

You may also move the front seat forward to allow

more room for the car seat.

2. Next, pull enough of the seat belt webbing from the

retractor to pass it through the belt path of the child

restraint. Do not twist the belt webbing in the belt

path.

3. Slide the latch plate into the buckle until you hear a

“click.”

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 113

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 682 683

Kommentare zu diesen Handbüchern

Keine Kommentare

CanMore Sport-Guide Mate Bedienungshandbuch Seite 115

Kommentare zu diesen Handbüchern